Eureka AS2000 series User Manual

Browse online or download User Manual for Vacuum cleaners Eureka AS2000 series. SAVE THESE INSTRUCTIONS

  • Download
  • Add to my manuals
  • Print
  • Page
    / 2
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 0
© 2012 Electrolux Home Care Products, Inc. Printed in China PN 090211_rev2
© 2012 Electrolux Home Care Products, Inc. Printed in China PN 090211_rev2
IMPORTANT SAFEGUARDS
When using an electrical appliance, basic precautions should
always be followed, including the following:
READ ALL INSTRUCTIONS BEFORE USING THIS
VACUUM CLEANER.
WARNING
To reduce the risk of re, electric shock, or injury:
• Do not use outdoors or on wet surfaces.
• Do not leave vacuum cleaner when plugged in. Turn off the
switch and unplug the electrical cord when not in use and
before servicing.
• Do not allow to be used as a toy. Close attention is
necessary when used by or near children.
• Use only as described in this manual. Use only
manufacturer’s recommended attachments.
• Do not use with damaged cord or plug. If vacuum cleaner is
not working as it should, has been dropped, damaged, left
outdoors, or dropped into water, return it to a service center
before using.
• Do not pull or carry by cord, use cord as a handle, close a
door on cord, or pull cord around sharp edges or corners.
Do not run vacuum cleaner over cord. Keep cord away from
heated surfaces.
• Do not use extension cords or outlets with inadequate
current carrying capacity.
• Turn off all controls before unplugging.
• Do not unplug by pulling on cord. To unplug, grasp the plug,
not the cord.
• Do not handle plug or vacuum cleaner with wet hands.
• Do not put any object into openings. Do not use with any
opening blocked; keep free of dust, lint, hair, and anything
that may reduce airflow.
• This vacuum cleaner creates suction. Keep hair, loose
clothing, fingers, and all parts of body away from openings
and moving parts.
• Do not place vacuum on furniture or stairs as the brush roll
may cause damage.
Use extra care when cleaning on stairs. Do not place
vacuum at top of stairs.
Use extra care when cleaning area rugs as the brush roll
may cause damage.
Unplug before connecting turbo nozzle (if supplied) or other
attachments. Place vacuum on floor with the handle in
upright position while using attachments.
• Do not pick up anything that is burning or smoking, such as
cigarettes, matches, or hot ashes.
• Do not use without dust cup or filter(s) in place.
• Do not use to pick up flammable or combustible liquids such
as gasoline, or use in areas where they may be present.
• Store your vacuum indoors in a cool, dry area.
• Keep your work area well lighted.
• Unplug electrical appliances before vacuuming them.
• Brush roll could suddenly restart. Unplug before servicing.
www.eureka.com
www.eureka.com
AS2000-AS2039 Series
OWNER’S GUIDE
Registration
To register your product visit www.eureka.com and click on the ‘Register Your Product’ link in the top right
corner.
Eureka Limited Warranty
For full warranty details, please refer to the additional instructions at www.eureka.com or call the customer
service helpline at 1-800-282-2886.
Maintenance Schedule
Make sure vacuum cleaner is turned off and power cord is unplugged when performing
any maintenance.
For maintenance information, see maintenance section in this guide, see backside of dust cup
or visit www.eureka.com. Maintenance not described must be performed by an authorized
dealer.
DUST CUP – Empty after each use
FILTER DCF26 – Replace or clean regularly to maintain suction
U BELT – Check and replace if worn, cut or out of shape
BRUSHROLL – Clean monthly
Thermal Cutoff
This vacuum cleaner has a special thermostat that protects the vacuum in case of motor
overheating.
If the vacuum suddenly shuts off proceed as follows:
1) Push the on/off switch off (l) and unplug the vacuum.
2) Check the vacuum for a possible source of overheating such as a full dust cup, a blocked hose or
clogged filter. If these conditions are found, fix them and wait at least 30 minutes before attempting to use
the vacuum.
3) After the 30 minute period, plug the vacuum back in and push the on/off switch on (l). If the vacuum still
does not work, call the Eureka customer service helpline.
Problem Solving
For questions and problems related to your vacuum, please visit www.eureka.com or call the Customer
Service Helpline: 1-800-282-2886.
What’s In The Carton
For detailed vacuum information including FAQs
please visit eureka.com or call the Customer
Service Helpline: 1-800-282-2886.
8 a.m. to 7:30 p.m. (CST), Monday - Friday
10 a.m. to 6:30 p.m. (CST), Saturday - Sunday
Dust Cup
Base
Owner’s manual
Handle
Backbone
Hose
Turbo nozzleBonus Extension
Wand
SPECIAL FEATURES
Available on some models
Dusting Brush
Nested Crevice
tool and
Extension Wand
SAVE THESE
INSTRUCTIONS
FOR HOUSEHOLD USE ONLY
To reduce the risk of electric shock, this appliance has a polarized plug
(one blade is wider than the other). This plug will fit in a polarized outlet
only one way. If the plug does not fit fully into the outlet, reverse the plug.
If it still does not fit, contact a qualified electrician to install the proper
outlet. Do not change the plug in any way.
Do not oil the motor or brush roll at any time, the bearings are
permanently lubricated and sealed.
Maintenance
Cleaning the Dustcup Cleaning the Filter
Replacing the Belt
Hold dust cup handle in one
hand and the bottom of dust
cup in the other, turn dust cup
counter clockwise to unlock the
cup from the lid.
Hold dust cup handle in one
hand and the bottom of dust
cup in the other, line up arrow
on dust cup with unlock icon
on backside of dust cup. Turn
clockwise to lock the cup
to the lid.
Pull dust cup latch to release
dust cup. Remove lter
and wash. Allow to air dry
thoroughly (24 hours) before
placing back in dust cup
Empty the dust cup into
the trash container. Wipe
debris off screen.
Latch
Dustcup
Screen
Unplug vacuum. Recline cleaner
back. Using Philips screwdriver,
remove 4 screws from hood.
Remove belt from the brushroll and
motor shaft. Loop new belt over
motor shaft and brushroll, onto grey
belt pulley.
Using thumbs, push down on height
adjust knob, while pulling up on
inside hood edges with ngers. Lift
and remove hood.
Lift left side of brushroll out of
grooves. Then lift right side of
brushroll out of grooves.
Line up corners of hood and put
hood tab inside the front of cleaner.
From front to back, push hood
onto base, keeping hood in base
grooves, and line up 4 screw holes.
Replace 4 screws.
Grip the brushroll and belt as shown.
Stretch belt and push the right side of
brushroll into grooves. Lower left side of
brushroll into grooves making sure both
sides are secure by pushing down. Rotate
the brushroll with hands to make sure belt is
in center of gray pulley.
To view our “How to Assemble” demo, visit www.eureka.com/airspeed/assembly
Please contact our customer service helpline at 1-800-282-2886.
Easy Assembly Get Ready to Vacuum
Remove extension wand
and crevice tool from
inside backbone hole.
Lower backbone onto the
Base. Push down to snap
into place.
To attach hose connector,
align tabs and lower hose
onto connector. Turn
clockwise to lock.
Route hose through
hose retainer on
front of handle.
Route hose end
into clips on the
side of vacuum.
Store Extension
Wand and
Crevice tool side of
vacuum. Crevice
tool slides into top
of wand end.
Store Dusting
brush on back of
vacuum.
On some models:
Attach turbo to clip
on Handle.
Lower Handle on to
Backbone. Push down to
snap into place.
Put dust cup into place
on base. Push handle
toward Backbone to snap
into place.
To vacuum oors, turn
air path knob to ‘oors.’
Adjust height for
carpet or bare oors.
Step on foot graphic on
hood and pull back on
handle to recline vacuum.
Step on power switch to
turn on; step on again to
turn off.
If desired, route cord
through cord clips before
storing on hooks
For hose cleaning turn air path knob to “tools”. Attach tools to end of wand. To replace, store crevice
tool inside extension wand and store this, dusting brush and turbo nozzle (for some models) in clips.
Page view 0
1 2

Summary of Contents

Page 1 - INSTRUCTIONS

© 2012 Electrolux Home Care Products, Inc. Printed in China PN 090211_rev2© 2012 Electrolux Home Care Products, Inc. Printed in China PN 090211_rev2IM

Page 2 - INSTRUCCIONES

© 2012 Electrolux Home Care Products, Inc. Printed in China PN 090211_rev2© 2012 Electrolux Home Care Products, Inc. Printed in China PN 090211_rev2ME

Comments to this Manuals

No comments