Eureka Maxima 4700D Specifications download pdf (Page 22)

FIG. 23

ENGLISH

HOW TO MAINTAIN (continued)

To Replace Dust Cup Pleated Filter

CAUTION: Turn off the switch and unplug the electrical cord before

changing the Pleated Filter. Never operate the vacuum

cleaner without the dust cup or the pleated filter

assembly. To maintain good performance, check and clean

the Pleated Filter each time the dust cup is emptied and

clean if needed. The filter can be cleaned by washing it

with mild detergent and warm water. Be sure pleated filter

is completely dry before reinstalling.

To Clean the Pleated Filter

Step 1: Remove the dust cup lid assembly by turning the lid counter

clockwise and lifting upward and out of the dust cup.

Step 2: Grasp the pleated filter and turn counter clockwise to remove

(FIG. 21).

Step 3: Shake off dust and hair in the trash holding onto the lid. To wash,

rinse only using warm water. Shake excess water from filter. Do

not submerge filter assembly.

Step 4: When all parts are completely dry, replace pleated filter and turn

clockwise to lock in place.

Pleated Filter Assembly

Use The Eureka brand replacement pleated filter, Style DCF-4, part

number 62132.

Emptying The Dust Cup

It is clearly visible when the dust cup is full and needs emptying. There is

a fill line to help determine when the cup is full. Remove dust cup from

cleaner body, remove the lid and dump debris in a waste container.

Reinstalling The Dust Cup

To mount the filter assembly into cleaner body, make certain the filter

assembly is fully seated in top of dust cup (FIG. 22). Replace dust cup by

aligning front of the bottom of dust cup into groove on cleaner. Pivot dust

cup up against cleaner and push in place until the dust cup latch is secure.

NOTE: The dust cup can be washed in warm water, if desired, but strong

detergents should not be used. Dry thoroughly before using again.

How To Change Light Bulb (FIG. 23)

To replace light bulb, please contact customer service – not available in

stores.

CAUTION: Turn off the power switch and unplug the electrical cord

before changing light bulb.

Step 1: Lower handle and remove two screws from lens cover.

Step 2: Pull lens cover from cleaner.

Step 3: Support socket with one hand and pull light bulb straight out to

release.

Step 4: Place new light bulb into socket; push to secure.

Step 5: Make certain bulb will not touch lens cover.

Step 6: Replace lens cover.

Step 7: Secure lens cover with two screws.

Customer Assistance

USA 1-800-282-2886

Mexico (55) 5343-4384

Canada 1-800-282-2886

Headlight is not available on all models.

L’éclairage frontal n’est pas disponible sur tous les modèles.

La luz frontal no se incluye en todos los modelos.

FIG. 22

FIG. 22a

FIG. 22b

FIG. 21

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 35 36

Comments to this Manuals

No comments

Eureka Maxima 4700D Specifications Page 22

Comments to this Manuals

Related products and manuals for Vacuum cleaners Eureka Maxima 4700D